English
Electronics Components
-
Quad Store QC3.0 QC2.0 USB DC-DC Buck Converter Charging Step Down Module 6-32V 9V 12V 24V to Fast Quick Charger Circuit Board 3V 5V 12V
DC-DC Step Down Buck Converter Charging Module USB 6-32V 9V 12V 24V to QC3.0 QC2.0 Fast Quick Charger 3V 5V 12V Circuit Board.Support fast charging protocol for BC1.2, iPhone, Samsung agreementfor Qualcomm QC2.O and QC3.O -
Quad Store LM2596 DC-DC Buck Converter Step Down Module
QUICK OVERVIEW Input voltage: 4.5-50V, Output voltage: (3-35V) continuously adjustable (recommended load debugging). Minimum pressure: 1.5V Output current: rated current 2A, 3A maximum Output Power: 15W maximum -
Quad Store KIS3R33S Module 5V USB DC 7V-24V To 5 V 3A Step-Down Buck Output Converter
Features Modules nature: non-isolated buck Rectification: non-synchronous rectification Input voltage: DC 7V - 24V Output voltage: DC 5V Output current: 4A(short time) Conversion efficiency: 96% (MAX) Switching frequency: 340KHz Output ripple: 30mV(max) Load regulation: ± 0.5% Voltage regulation: ± 2.5%… -
Quad Store DC-DC 0.9V-5V to 5V 600MA Step-Up Booster USB Mobile Power Supply Module
Features: Input voltage: 0.9V - 5V Output voltage: 5.1 - 5 .2 V Output Current: Rated 200mA - 300mA (single lithium input) Efficiency: Up to 96% (the higher the input voltage, the higher the efficiency) Switching frequency: 500KHz Output ripple:… -
Quad Store AC 220V 3000W SCR Voltage Regulator Dimming Dimmers Speed Controller
QUICK OVERVIEW Input Voltage: 220V AC. Maximum Power: 3000W. Adjustable Voltage: 0-220V AC. AC frequency: 50-60Hz. Size(LxWxH): Approx 57 x 49 x 27 mm. Material: Plastic, metal. -
Quad Store 8 Channel 5V Relay Module (With Light Coupling)
QUICK OVERVIEW Channel: 8 channel Relay Operating Voltage: 5V One normally closed contact and one normally open contact Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for the avoidance of malfunction Power supply indicator and Control indicator lamp… -
Quad Store 8 Channel 12V Relay Module (With Light Coupling)
Features Operating Voltage: 12V DC Equipped with high-current relay 10A@250VAC / 10A@30VDC It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy… -
Quad Store 5V 4 Channel SSR G3MB-202P Solid State Relay High level Trigger Module For Arduino
Product Description: 4 x DC 5V SSR High Level Triggering Module - 2A is used to connect 4 AC loads to your arduino. This module is equiped with Solid State Relay (SSR) which enables fast switching operation. This module has… -
Quad Store 4 Channel 5V Relay Module (With Light Coupling)
QUICK OVERVIEW Channel: 4 channel Relay Operating Voltage: 5V Triode drive, increasing relay coil High impedance controller pin Pull-down circuit for the avoidance of malfunction Power supply indicator and Control indicator lamp Power supply and relay instructions, lit, the disconnect is… -
Quad Store 4 Channel 12V Relay Module (With Light Coupling)
Features: Operating Voltage: 12V DC Equipped with high-current relay 10A@250VAC / 10A@30VDC It can control both AC and DC appliances such as Solenoids, Motors, lights, fans, etc High-quality screw terminals (Terminal Block) provided (C, NC, NO) for quick and easy… -
Quad Store 2 Channel 5V Relay Module With Optocoupler
QUICK OVERVIEW Two separate LEDs for On/Off indication of the Relay. Triggering input voltage 3.3V – 5V Two separate LEDs for On/Off indication of the Relay Triggering input voltage 3.3V – 5V 4) Back EMF protection Back EMF protection 2… -
Quad Store 2 Channel 12V Relay Module (With Light Coupling)
QUICK OVERVIEW Operating Voltage: 12V DC Two separate LEDs for On/Off indication of the Relay Triggering input voltage 3.3V – 5V 4) Back EMF protection Equipped with high-current relay 10A@250VAC / 10A@30VDC It can control both AC and DC appliances…
