English
Arduino Modules
Arduino Modules
-
Quadstore RC522 RFID 13.56MHZ Reader Writer Module with RFID card and Keyfob
QUICK OVERVIEW Voltage: DC 3.3V (Do not use 5V supply) Operating Current :13-26mA Idle Current :10-13mA Operating Frequency: 13.56MHz Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IEC 14443 A/MIFARE Typical operating distance in reading/Write mode up to 50… -
Quad Store TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
Features Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 30 mA Display Dimensions: 42x24x12 (LxWxH) mm -
Quad Store SD Card Reading Writing Module for Arduino
Features All SD SPI pins output, MOSI, SCK, MISO, and CS. Support 5V/3.3V input. Size:4.7 x 3.1 cm. LED indicator. SD Card Holder. Onboard 3.3V regulator (AMS1117-3.3) for +5v to 3.3V generation. 3.3V is also available as output. -
Quad Store RTC Real Time Clock DS1307 I2C IIC Module for Arduino
QUICK OVERVIEW Two-wire I2C interface. Hour: Minutes: Seconds AM/PM. Day Month, Date – Year. DS1307 based RTC (Battery include). 1Hz output pin. Available in 8-pin DIP or SOIC -
Quad Store PS2 Joystick Module Breakout Sensor for Arduino and other MCUs
QUICK OVERVIEW Dimensions: 40 x 27 x 15 (LxWxH) mm. Weight: 10gm (without Hat). 2.54mm pin interface leads. Operating Voltage: 5V. Long service life and stable performance. Standard interface and electronic building blocks. Widely use in Arduino DIY projects. -
Quad Store NTC Thermistor Temperature Sensor Module
QUICK OVERVIEW Adopt the NTC thermistor sensor, sensitivity is good The comparator output, signal clean, good waveform, driving ability is strong, for more than 15 ma. With potentiometer to adjust the temperature detection threshold Working voltage: 3.3 V to 5… -
Quad Store NodeMCU ESP8266 CP2102 NodeMCU WIFI Serial Wireless Module
QUICK OVERVIEW Open-source, Interactive, Programmable, Low cost, Simple, Smart, WI-FI enabled Arduino-like hardware IO Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units Onboard USB to serial chip to easily program… -
Quad Store Micro SD Storage Board, Micro SD TF Card Memory Shield Module SPI, Micro SD Adapter- Arduino, ARM and Other MCU
QUICK OVERVIEW Power supply: 4.5V – 5.5V, 3.3V voltage regulator circuit board Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm Control Interface: GND, VCC, MISO, MOSI, SCK, CS Size: 45 x 28mm Net weight: 6g -
Quad Store L293D Motor driver module
This module is a medium power motor driver perfect for driving DC Motors and Stepper Motors.It uses the popular L293D motor driver IC. It can drive 4 DC motors in one direction, or drive 2 DC motors in both the… -
Quad Store HC-06 Bluetooth Transceiver Module with TTL Output
Features: Features HC-06 Bluetooth Module Typical ‐80dBm sensitivity. Up to +4dBm RF transmits power. Low Power 1.8V Operation, 3.3 to 5 V I/O. PIO control. UART interface with programmable baud rate. With integrated antenna. With edge connector. Slave default Baud… -
Quad Store HC-05 Bluetooth Transceiver Module With TTL Outputs (With Base)
Features: Bluetooth protocol: Bluetooth Specification v2.0+EDR Frequency: 2.4GHz ISM band Modulation: GFSK(Gaussian Frequency Shift Keying) Emission power: ≤4dBm, Class 2 Sensitivity: ≤-84dBm at 0.1% BERCSR Bluetooth Chip Solution Enhanced Data Rate (EDR) compliant with V2.0.E.2 of the specification for both… -
Quad Store Finger Print Optical Fingerprint Reader Sensor Module Sensors All-in-one for Arduino
QUICK OVERVIEW Integrated image collecting and algorithm chip together, ALL-in-One The fingerprint reader can conduct secondary development, can be embedded into a variety of end products Low power consumption, low cost, small size, excellent performance Professional optical technology, precise module…
